- Toyota Tacoma Standard Transmission
- Toyota Tacoma 4x4 Manual Transmission
- Toyota Tacoma Rebuilt Transmission
- Toyota Tacoma 4wd Manual Transmission
- Toyota Tacoma With Manual Transmission
- Tacoma Truck Manual Transmission
- Toyota Tacoma 4x4 Manual
1996 Tacoma Pickup For ’96, Toyota’s Tacoma pickup is provided with a new off-road package that includes a locking rear differential. The new unit is available only on regular-cab 4WD models with a manual transmission. Sep 26, 2016 A six-speed manual or six-speed programmed transmission is accessible. The V6 Tow bundle is likewise standard on the 2017 Toyota Tacoma Manual Transmission Pro model and incorporates a Class-IV towing collector, programmed transmission cooler (if material), motor oil cooler, power guiding cooler, 130-amp alternator, four-and seven-pin.
Find the engine specs, MPG, transmission, wheels, weight, performance and more for the 2015 Toyota Tacoma TRD Access Cab 4WD V6. As a 2010 Toyota Tacoma owner, you know you can depend on your Tacoma for many miles to come. 2010 Toyota Tacoma 4.0L V6 4x4 AT Double Cab OEM Transmission and Driveline parts will give you both peace of mind and total confidence for all those miles.
The Toyota Tacoma is a pickup truck manufactured in the U.S. by the Japanese automobile manufacturer Toyota since 1995. The first generation Tacoma, model years 1995½ through 2004, was classified as a compact pickup. The second generation was classified as mid-size. The Tacoma was Motor Trend Magazine’s Truck of the Year for 2005.
The Tacoma was introduced in the US in 1995 as a replacement for the Hilux, which prior to this was marketed in the US under the name Toyota Pickup. Compared with the Hilux, the Tacoma is engineered with a greater priority on ride quality, handling, comfort, and safety over ruggedness and payload capacity. The design is intended to better suit the needs of the US and Canadian pickup truck market, where pickup trucks, particularly compact and mid-sized models, are often used as personal vehicles, and less exclusively for commercial, agricultural, and off road use.
There were a total of three engines available for the Toyota Tacoma:
- 2.4 L four-cyclinderrated at 142 hp (106 kW) and 160 lb·ft (217 N·m) of torque
- 2.7 L four-cylinder rated at 150 hp (112 kW) and 177 lb·ft (240 N·m) of torque
- 3.4 L V6 rated at 190 hp (142 kW) and 220 lb·ft (298 N·m) of torque.
The 2.4 L gave a highly useful 29 miles per US gallon (8.1 L/100 km; 35 mpg-imp) (hwy), the 2.7 L gave 26 miles per US gallon (9.0 L/100 km; 31 mpg-imp) (hwy), and the 3.4 L delivered 22 miles per US gallon (11 L/100 km; 26 mpg-imp) (hwy).
Two-wheel drive Tacomas had 5-stud wheel lug patterns. The 2.4 L and 3.4 L engines were available in this vehicle depending on options. Automatic and manual transmissions were available.
Four-wheel drive Tacomas had six-stud wheel lug patterns, which had been used on the prior pickups (pre-Tacoma trucks). The truck’s frame is fully boxed until immediately after the front leaf spring mount bracket where it transitions into a c-frame section. The 3.4 V6’s manual transmission was an R150F while the automatic transmission was an A340F (Aisin code is 30-40LE). From 95-97 Single cab Tacomas had the option of a manual transmission with the 3.4 V6 engine. The factory supercharged 3.4L V6 produced 254 bhp (189 kW) and 270 lb·ft (366 N·m).From 1998 on, the single cabs only got a 2.7 L or a 2.4 L four-cylinder from the factory. TRD packages started in 1998 (if the V6 engine was selected, a differential locker in the rear came with it).
Prerunner models started in 1998. They share the same front and rear suspension parts and geometry, frame, styling and engine options as the 4×4 Tacomas of this year range. Prerunner Tacomas also had the option of the TRD Off-Road package which (like the 4×4) got a rear differential locker if it was a V6 model (among other suspension variations). One downside is there was no option of a five-speed transmission.The V6 Tacoma automatic transmissions were an A340E. Because of the similarities in the Prerunner and 4×4 models, it is possible to use stock parts to convert a Prerunner to a 4×4.
Toyota Tacoma Owners Manual / Vehicle specifications / Specifications / Maintenance data (fuel, oil level, etc.)
Dimensions
2WD models except PreRunner
*: Unladen vehicle
4WD models and PreRunner (except Regular Cab models)
*: Unladen vehicle
*: Unladen vehicle
Vehicle capacity weight
2WD models except PreRunner
*: Installing accessories in addition to those installed at the factory increases vehicle weight, thereby reducing vehicle capacity weight. Contact your Toyota dealer about the weight of accessory parts.
PreRunner
*: Installing accessories in addition to those installed at the factory increases vehicle weight, thereby reducing vehicle capacity weight. Contact your Toyota dealer about the weight of accessory parts.
4WD models
*: Installing accessories in addition to those installed at the factory increases vehicle weight, thereby reducing vehicle capacity weight. Contact your Toyota dealer about the weight of accessory parts.
TWR (Trailer Weight Rating)
Regular Cab models
Access Cab models
Double Cab models
*1: The model code is indicated on the Certification Label.
*2: Without towing package
*3: With towing package
Vehicle identification
■ Vehicle identification number
The vehicle identification number (VIN) is the legal identifier for your vehicle. This is the primary identification number for your Toyota. It is used in registering the ownership of your vehicle.
This number is stamped on the top left of the instrument panel.
Regular Cab and Double Cab models
This number is also on the Certification Label.
Access Cab models
This number is also on the Certification Label.
■ Engine number
The engine number is stamped on the engine block as shown.
2.7 L 4-cylinder (2TR-FE) engine
4.0 L V6 (1GR-FE) engine
Engine
2.7 L 4-cylinder (2TR-FE) engine
4.0 L V6 (1GR-FE) engine
Fuel
Lubrication system
*: The engine oil capacity is a reference quantity to be used when changing the engine oil. Warm up and turn off the engine, wait more than 5 minutes, and check the oil level on the dipstick.
■ Engine oil selection
“Toyota Genuine Motor Oil” is used in your Toyota vehicle. Use Toyota approved “Toyota Genuine Motor Oil” or equivalent to satisfy the following grade and viscosity.
Oil grade: ILSAC GF-5 multigrade engine oil
Recommended viscosity:
2.7 L 4-cylinder (2TR-FE) engine SAE 0W-20
SAE 0W-20 is the best choice for good fuel economy and good starting in cold weather.
If SAE 0W-20 is not available, SAE 5W-20 oil may be used.
However, it must be replaced with SAE 0W-20 at the next oil change.
Oil viscosity (0W-20 is explained here as an example): ● The 0W in 0W-20 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather.
● The 20 in 0W-20 indicates the viscosity characteristic of the oil when the oil is at high temperature. An oil with a higher viscosity (one with a higher value) may be better suited if the vehicle is operated at high speeds, or under extreme load conditions.
4.0 L V6 (1GR-FE) engine SAE 5W-30
SAE 5W-30 is the best choice for good fuel economy and good starting in cold weather.
If SAE 5W-30 is not available, SAE 10W-30 oil may be used.
However, it should be replaced with SAE 5W-30 at the next oil change.
Oil viscosity (5W-30 is explained here as an example): ● The 5W in 5W-30 indicates the characteristic of the oil which allows cold startability. Oils with a lower value before the W allow for easier starting of the engine in cold weather.
● The 30 in 5W-30 indicates the viscosity characteristic of the oil when the oil is at high temperature. An oil with a higher viscosity (one with a higher value) may be better suited if the vehicle is operated at high speeds, or under extreme load conditions.
How to read oil container label: The International Lubricant Specification Advisory Committee (ILSAC) Certification Mark is added to some oil containers to help you select the oil you should use.
Cooling system
Ignition syste
NOTICE
■Iridium-tipped spark plugs (2.7 L 4-cylinder [2TR-FE] engine only)
Use only iridium-tipped spark plugs. Do not adjust gap when tuning engine.
Electrical system
Differential
*: Your Toyota vehicle is filled with “Toyota Genuine Differential Gear Oil” at the factory. Use Toyota approved “Toyota Genuine Differential Gear Oil” or an equivalent oil of matching quality to satisfy the above specification. Please contact your Toyota dealer for further details.
Automatic transmission
4-speed models
5-speed models
*: The fluid capacity is the quantity of reference. If replacement is necessary, contact your Toyota dealer.
NOTICE
■Automatic transmission fluid type (4-speed models)
Using automatic transmission fluid other than “Toyota Genuine ATF Type T-IV” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the automatic transmission of your vehicle.
■Automatic transmission fluid type (5-speed models)
Using automatic transmission fluid other than “Toyota Genuine ATF WS” may cause deterioration in shift quality, locking up of your transmission accompanied by vibration, and ultimately damage the automatic transmission of your vehicle.
Manual transmission
Clutch
Transfer (4WD models)
Brakes
*1: Minimum pedal clearance when depressed with a force of 110 lbf (490 N, 50 kgf) with the engine running.
*2: Parking brake pedal travel when depressed with a force of 67.4 lbf (300 N, 30.6 kgf).
*3: Parking brake lever travel when pulled with a force of 44.9 lbf (200 N, 20.4 kgf).
Chassis lubrication (4WD models and PreRunner with 2.7L 4-cylinder [2TR-FE] engine only)
Steering
Tires and wheel
Type A
Toyota Tacoma Standard Transmission
*: If you affix the spare tire to a front position, please make sure to adjust the tire to the correct inflation pressure as soon as possible.
Type B
Type C
*: If you affix the spare tire to a front position, please make sure to adjust the tire to the correct inflation pressure as soon as possible.
Type D
Toyota Tacoma 4x4 Manual Transmission
Type E
Type F
Light bulbs
Toyota Tacoma Rebuilt Transmission
*1: If equipped
*2: Bulb type only
A: HB2 halogen bulbs
B: H11 halogen bulbs
C: Wedge base bulbs (clear)
Toyota Tacoma 4wd Manual Transmission
D: Wedge base bulbs (amber)
Toyota Tacoma With Manual Transmission
E: Double end bulbs
Fuel information
Your vehicle must use only unleaded gasoline. Select octane rating 87 (Research Octane Number 91) or higher. Use of unleaded gasoline with an octane rating lower than 87 may result in engine knocki ...Tacoma Truck Manual Transmission
Other materials:
AVC-LAN Circuit
DESCRIPTION Each unit of the navigation system connected to the AVC-LAN (communication bus) transfers the switch signals using the AVC-LAN. If a short to +B or short to ground occurs in the AVC-LAN, the navigation system will not function normally because communication is not possible. WIRING ...
DESCRIPTION Each unit of the navigation system connected to the AVC-LAN (communication bus) transfers the switch signals using the AVC-LAN. If a short to +B or short to ground occurs in the AVC-LAN, the navigation system will not function normally because communication is not possible. WIRING ...
Toyota Tacoma 4x4 Manual
ABS Warning Light does not Come ON
DESCRIPTION Refer to ABS Warning Light Remains ON (See page ). WIRING DIAGRAM Refer to ABS Warning Light Remains ON (See page ). CAUTION / NOTICE / HINT NOTICE: When replacing the skid control ECU (master cylinder solenoid), perform calibration (See page ). Inspect the ...
DESCRIPTION Refer to ABS Warning Light Remains ON (See page ). WIRING DIAGRAM Refer to ABS Warning Light Remains ON (See page ). CAUTION / NOTICE / HINT NOTICE: When replacing the skid control ECU (master cylinder solenoid), perform calibration (See page ). Inspect the ...
Terminals Of Ecu
TERMINALS OF ECU 1. BLIND SPOT MONITOR SENSOR LH (MASTER) Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition B12-3 (BIND) - B12-10 (BLGD) Y - W-B Blind spot monitor ...
TERMINALS OF ECU 1. BLIND SPOT MONITOR SENSOR LH (MASTER) Terminal No. (Symbol) Wiring Color Terminal Description Condition Specified Condition B12-3 (BIND) - B12-10 (BLGD) Y - W-B Blind spot monitor ...